A brand new product from GLR. OO gauge Omni couplings that are for non NEM Pockets. 

These magnetic couplings have been under design for quite some time. These coupling have been designed to replace all older types of tension lock couplings. In the pack you will get:

• Optional Screw Pack
• Quantity of Non NEM Pocket Couplings (based on option selected)

Length of the coupling is measured from end of magnet to centre of screw hole

Magnetic coupling is great but with a normal magnetic coupling you have to make sure you get the poles correct, ie a North has to go with a South pole on a magnet other wise they will not link. This could happen if you rotate a loco. We have devised the omni MagNEM to solve this. You do not need to worry about which direction the magnetic couplings are. Also we have made them in several sizes and in different thicknesses to combat the variety of coupling pockets and stock types. 

Please measure carefully to ensure you get the correct length for your stock as there are many variations of pocket positioning,the long coupling will allow most stock to go round radius 2. Shorter couplings will give closer coupling but require greater radius curves. We have used a variety of combinations to get even the Bachmann Brake down crane to negotiate R2 curved without derailment!

11

Please note: These are not designed for automatic uncoupling as they connect magnet to magnet.

Registered Design Number 6089631