A brand new product from GLR. O gauge 3 link couplings (Registered Design)

These magnetic couplings have been under design for quite some time. One of the most frustrating things with 3 link couplings is how long it can take to get them connected, especially when there are things in the way like corridor connections and the like. 

These will fit straight into most O gauge models, but can be trimmed or filed down to fit models with a shorter or narrower coupling. 

These are designed to replace existing couplings and do not come supplied with replacement springs or retaining pins. 

Please note: These are not designed for automatic uncoupling as they connect magnet to magnet. The best way to uncouple these is to push downwards in the middle of the magnet plates.

Available options(All come as Hook and Chain and are available as a 2 or 5 PAIR pack):

1.5 Link with a single 3mm magnet on the ends, draw strength is 0.19KG of pull before separating

1.5 Link with dual 3mm Magnets on the ends, draw strength is 0.38KG of pull before separating

1.5 Link with large 5mm Magnet on the ends, draw strength is 0.46KG of pull before separating

46

Registered Design Number 6088699