The next show is Minehead on 31st May 2025. Come and see us there!
The next show is Minehead on 31st May 2025. Come and see us there!
Home / Signatrak DCC
product review overlay image
IMP Digital Servo Controller

Product Description

The IMP drives a model control servo between two pre-set positions, using either DCC commands or a remote switch. The unit may also be supplied from conventional DC power.

If used for signalling a bounce can be set for when the signal moves to the danger position

Operates on Digital Command Control (DCC) or conventional DC.

There is an optional Relay Accessory Board that plugs into the IMP to give a frog switching relay. You can also use the relay to drive other circuits and provide interlocking, signal control and even LEDs in a control panel to show that the servo has moved.

Specifications

Brand
Signatrak
Condition
New
The IMP drives a model control servo between two pre-set positions, using either DCC commands or a remote switch. The unit may also be supplied from conventional DC power.

If used for signalling a bounce can be set for when the signal moves to the danger position

Operates on Digital Command Control (DCC) or conventional DC.

There is an optional Relay Accessory Board that plugs into the IMP to give a frog switching relay. You can also use the relay to drive other circuits and provide interlocking, signal control and even LEDs in a control panel to show that the servo has moved.
Brand
Signatrak
Condition
New

Delivery & Returns

Please see the delivery and about us page for delivery charges and options, also you can add the itemt o basket to see delivery options

IMP Digital Servo Controller

Out of stock

Available Now
VAT Number: GB350243339 Registered company: 11666555
© Copyright 2016-2025 GLR Bespoke Services All rights reserved