(Registered Design)

This listing is pre-release while we build up stock, initial orders will be produced separately to stock build up and may take up to a week to dispatch

This design has been created specifically to fit Heljan O gauge models, as the coupling shank is a little different from other standard designs, however they have also been found to fit MTH coaching stock and should fit the Dapol autocoach too, which will be confirmed post test fit.

These are designed to replace existing couplings and do not come supplied with replacement springs or retaining pins. 

Please note: These are not designed for automatic uncoupling as they connect magnet to magnet. The best way to uncouple these is to push downwards in the middle of the magnet plates.

Available options(All come as Hook and Chain and are available as a 2 or 5 PAIR pack):

1.5 Link with dual 3mm Magnets on the ends, draw strength is 0.38KG of pull before separating

1.5 Link with large 5mm Magnet on the ends, draw strength is 0.46KG of pull before separating

56