DETAILS - Available to Pre Order Now
3D printed Semaphore Signals in OO Gauge made to order (lead time 1-3 weeks)
N and O also available soon. Please select carefully from the options shown noting the following:
Signals are offered in 2 different states (at present):
- Assembled and painted signal, rods in position going to below the base plate that will move the signal arm(s). Signal Arms as either Home or Distant type (please specify this in the text box area). No Servos attached. Lamps fitted behind the Signal Arm (this requires a 12 V DC Power Supply)
- Assembled, painted and servos fitted. Fully working signal. It will need a servo controller. You can use any standard 3 pin control or select from the various DC and DCC options in the drop list. If selecting a DCC controller you will also need a separate 12V DC Feed to power the light behind the spectacle plates.
Please ensure you only select from one of the above options in the drop down lists for the finish type and leave the other unselected otherwise it will charge you incorrectly.
If you have specific requirements for signal head types (Home, Distant), height of signal arms or other requirements please use the test box to note it. In regards to heights, please use a measurement in mm from the board to height of the signal arm.
Also coming soon are Gantry versions, 2 posts and with up to 6 working signal arms and Ground Shunt Signals. Again fully motorised and lit. The final aim for these is to be able to offer kit versions at a later date as well.